Projector for home top goes down from the bottom in home

  

Globus keypad lock projector for home

The projector for home keypad can be completely locked or turned off except for the respective power on and off. It can be done according to the convenience, it is necessary to turn the power on or off. If you keep the rest of the keypad completely locked, then its setting will not always have to be changed. According to the distance and size of the screen, if the projector is fixed at one place. All settings are properly locked except on and off.

What is the accuracy of ceiling projector for home

Projector for home let me tell you the most important thing. Do an experiment first. Try lighting any light bulb on the ground. Then after burning it upwards and watch it. Then you will know that when the light burns on the ground. Gives less light. And it remains dark upstairs. And when the lights are lit up, the room gets lit up with full light. If you use one thing, you will understand yourself.

Light spreads well from top to bottom projector

The top goes down from the bottom. Projector is placed below or in front of the screen, the accuracy may fluctuate then it may be that the shadow of the projector is more on the lower side and less on the upper side of the whole screen. When the projector is mounted slightly or higher than its head, the light is on the same screen all around. This is the reason why projectors are often placed above in theaters and cinema houses. So that the shadows of the picture look the same everywhere and everyone likes the movie.

How to make a projector at home using a flashlight?

This can be done with the help of magnifying lens. On a wooden strap, set the torch at one end at 180 degrees. Fix the magnifying lens on the other end of the strap. Put a square band in the middle in which the film of the image can be trapped but make it such that it can be moved back and forth. Then you can see that image on any white wall or screen by lighting the torch. If dim or blank light is visible through the magnifying lens, you can set the accuracy by moving the frame containing the image back and forth. It has to be carried back and forth according to the distance. The greater the distance, the bigger the picture will look. In this way, make a projector at home using a flashlight.